This practical set includes an Ediabas / INPA compatible USB diagnostic interface and an additional 20 pin OBD 2 to OBD 1 adapter cable.

Thanks to the latest technology built into this set, you are now able to establish a stable USB connection to BMW vehicles.

This is now possible without the well-known synchronization or timing problems that have been caused by most conventional USB converters.

Depending on the software used, you can read out the error memory or, for example, adjust the immobilizer, change the cruise control and carry out live data analysis, etc.

This convenient set now allows you to make the following settings:

  • Activation of the TV function
  • Allow the sunroof to close automatically when it rains
  • By tapping your remote twice, you can open the driver's window halfway
  • Activation of an optical and acoustic acknowledgment (blinker and horn tone) when locking and unlocking
  • and many other practical settings

Special:

  • No additional hardware necessary
  • Direct connection via USB to the PC/laptop
  • Incl. driver
  • High quality
  • NOT an optocoupling solution, but a high-quality interface driver
  • Read & delete any error codes if necessary
  • Compatible with Edibas/INPA
  • Short circuit proof
  • Compatible with Windows 10, Windows 7, Vista, XP and Windows 2000
  • Deep diagnosis possible
  • Vehicle coding possible

Compatible BMW vehicle models:

(For models from 2006 only the pre-facelift models)

  • 3 Series - E36 E46 E46/2 E90 E91
  • 5 Series - E34 E39 E60 E61
  • 6 Series - E63 E64
  • 7 Series - E32 E38 E65
  • 8 Series - E31
  • X Series - E83 E53 E70
  • Z3 - E36/7 E36/8
  • Z4 - E85 E86
  • Z8 - E52

Supported control devices:

  • engine
  • automatic transmission
  • SECTION
  • Airbag
  • Panel insert
  • air conditioner
  • Central locking
  • Central comfort system
  • Immobilizer
  • radio
  • Sound system
  • coupling
  • Level control system
  • steering wheel
  • Steering assistance
  • Engine electronics 2
  • Engine electronics 3
  • and many other control devices

Technical data:

  • USB interface cable length: approx. 1.50m
  • Housing: plastic
  • Silver
  • 1 x control LED
  • 1 x OBD 2 16-pin standard connector
  • 1 x USB connector
  • 12V power supply (via diagnostic interface)
  • Supports ISO9141 & KWP2000 protocols
  • All manufacturer-specific protocols
  • High Speed ​​USB 2.0 (also USB 1.1 compatible)
  • OBD 2 to OBD 1 adapter cable length: approx. 25cm
  • Color: Black
  • 1 x OBD 1 20-pin standard connector
  • 1 x OBD 2 16-pin standard socket

Scope of delivery:

  • 1 x OBD USB diagnostic interface K+DCAN
  • 1 x USB driver (in download)
  • 1 x instructions (in download)
  • 1 x OBD 2 to OBD 1 20 Pin Adapter Cable

You can download the driver/instructions here >>Click here

You can find the password for the download on your invoice!

(Invoice will also be sent via email for the password)

Pin assignment of the OBD 2 to OBD 1 adapter:

OBD 1 connector OBD 2 socket
Pin code. 14 (+12V voltage/battery) Pin code. 16
Pin code. 15 (ISO 9141-2 L Line) Pin code. 15
Pin code. 17 (ISO 9141-2K Line) Pin code. 7
Pin code. 20 (ISO 9141-2K Line) Pin code. 7
Pin code. 19 (vehicle mass) Pin code. 4
Pin code. 19 (signal ground) Pin code. 5

Often ordered together

Total price $120.00

Customers also bought

    Complementary products